OpenPAI Training Service

NNI supports running an experiment on OpenPAI. OpenPAI manages computing resources and is optimized for deep learning. Through docker technology, the computing hardware are decoupled with software, so that it’s easy to run distributed jobs, switch with different deep learning frameworks, or run other kinds of jobs on consistent environments.

Prerequisite

  1. Before starting to use OpenPAI training service, you should have an account to access an OpenPAI cluster. See here if you don’t have any OpenPAI account and want to deploy an OpenPAI cluster. Please note that, on OpenPAI, your trial program will run in Docker containers.

  2. Get token. Open web portal of OpenPAI, and click My profile button in the top-right side.

    ../../_images/pai_profile.jpg

    Click copy button in the page to copy a jwt token.

    ../../_images/pai_token.jpg
  3. Mount NFS storage to local machine. If you don’t know where to find the NFS storage, please click Submit job button in web portal.

    ../../_images/pai_job_submission_page.jpg

    Find the data management region in job submission page.

    ../../_images/pai_data_management_page.jpg

    The Preview container paths is the NFS host and path that OpenPAI provided, you need to mount the corresponding host and path to your local machine first, then NNI could use the OpenPAI’s NFS storage to upload data/code to or download from OpenPAI cluster. To mount the storage, please use mount command, for example:

    sudo mount -t nfs4 gcr-openpai-infra02:/pai/data /local/mnt
    

    Then the /data folder in container will be mounted to /local/mnt folder in your local machine. Please keep in mind that localStorageMountPoint should be set to /local/mnt in this case.

  4. Get OpenPAI’s storage config name and containerStorageMountPoint. They can also be found in data management region in job submission page. Please find the Name and Path of your Team share storage. They should be put into storageConfigName and containerStorageMountPoint. For example,

    storageConfigName: confignfs-data
    containerStorageMountPoint: /mnt/confignfs-data
    

Usage

We show an example configuration here with YAML (Python configuration should be similar).

trialGpuNumber: 0
trialConcurrency: 1
...
trainingService:
  platform: openpai
  host: http://123.123.123.123
  username: ${your user name}
  token: ${your token}
  dockerImage: msranni/nni
  trialCpuNumber: 1
  trialMemorySize: 8GB
  storageConfigName: confignfs-data
  localStorageMountPoint: /local/mnt
  containerStorageMountPoint: /mnt/confignfs-data

Once completing the configuration and run nnictl / use Python to launch the experiment. NNI will start to spawn trials to your specified OpenPAI platform.

The job name format is something like nni_exp_{experiment_id}_trial_{trial_id}. You can see jobs created by NNI on the OpenPAI cluster’s web portal, like:

../../_images/nni_pai_joblist.jpg

Note

For OpenPAI training service, NNI will start an additional rest server and listen on a port which is your NNI WebUI’s port plus 1. For example, if your WebUI port is 8080, the rest server will listen on 8081, to receive metrics from trial job running in Kubernetes. So you should enable 8081 TCP port in your firewall rule to allow incoming traffic.

Once a trial job is completed, you can go to NNI WebUI’s overview page (like http://localhost:8080/oview) to check trial’s information. For example, you can expand a trial information in trial list view, click the logPath link like:

../../_images/nni_webui_joblist.png

Configuration References

Compared with Local Training Service and Remote Training Service, OpenPAI training service supports the following additional configurations.

Field name

Description

username

Required field. User name of OpenPAI platform.

token

Required field. Authentication key of OpenPAI platform.

host

Required field. The host of OpenPAI platform. It’s PAI’s job submission page URI, like 10.10.5.1. The default protocol in NNI is HTTPS. If your PAI’s cluster has disabled https, please use the URI in http://10.10.5.1 format.

trialCpuNumber

Optional field. Should be positive number based on your trial program’s CPU requirement. If it’s not set in trial configuration, it should be set in the config specified in openpaiConfig or openpaiConfigFile field.

trialMemorySize

Optional field. Should be in format like 2gb based on your trial program’s memory requirement. If it’s not set in trial configuration, it should be set in the config specified in openpaiConfig or openpaiConfigFile field.

dockerImage

Optional field. In OpenPAI training service, your trial program will be scheduled by OpenPAI to run in Docker container. This key is used to specify the Docker image used to create the container in which your trial will run. Upon every NNI release, we build a docker image with this Dockerfile. You can either use this image directly in your config file, or build your own image. If it’s not set in trial configuration, it should be set in the config specified in openpaiConfig or openpaiConfigFile field.

virtualCluster

Optional field. Set the virtualCluster of OpenPAI. If omitted, the job will run on default virtual cluster.

localStorageMountPoint

Required field. Set the mount path in the machine you start the experiment.

containerStorageMountPoint

Optional field. Set the mount path in your container used in OpenPAI.

storageConfigName

Optional field. Set the storage name used in OpenPAI. If it’s not set in trial configuration, it should be set in the config specified in openpaiConfig or openpaiConfigFile field.

openpaiConfigFile

Optional field. Set the file path of OpenPAI job configuration, the file is in yaml format. If users set openpaiConfigFile in NNI’s configuration file, there’s no need to specify the fields storageConfigName, virtualCluster, dockerImage, trialCpuNumber, trialGpuNumber, trialMemorySize in configuration. These fields will use the values from the config file specified by openpaiConfigFile.

openpaiConfig

Optional field. Similar to openpaiConfigFile, but instead of referencing an external file, using this field you embed the content into NNI’s config YAML.

Note

  1. The job name in OpenPAI’s configuration file will be replaced by a new job name, the new job name is created by NNI, the name format is nni_exp_{this.experimentId}_trial_{trialJobId} .

  2. If users set multiple taskRoles in OpenPAI’s configuration file, NNI will wrap all of these taskRoles and start multiple tasks in one trial job, users should ensure that only one taskRole report metric to NNI, otherwise there might be some conflict error.

Data management

Before using NNI to start your experiment, users should set the corresponding mount data path in your nniManager machine. OpenPAI has their own storage (NFS, AzureBlob …), and the storage will used in OpenPAI will be mounted to the container when it start a job. Users should set the OpenPAI storage type by paiStorageConfigName field to choose a storage in OpenPAI. Then users should mount the storage to their nniManager machine, and set the nniManagerNFSMountPath field in configuration file, NNI will generate bash files and copy data in codeDir to the nniManagerNFSMountPath folder, then NNI will start a trial job. The data in nniManagerNFSMountPath will be sync to OpenPAI storage, and will be mounted to OpenPAI’s container. The data path in container is set in containerNFSMountPath, NNI will enter this folder first, and then run scripts to start a trial job.

Version check

NNI support version check feature in since version 0.6. It is a policy to insure the version of NNIManager is consistent with trialKeeper, and avoid errors caused by version incompatibility. Check policy:

  1. NNIManager before v0.6 could run any version of trialKeeper, trialKeeper support backward compatibility.

  2. Since version 0.6, NNIManager version should keep same with triakKeeper version. For example, if NNIManager version is 0.6, trialKeeper version should be 0.6 too.

  3. Note that the version check feature only check first two digits of version.For example, NNIManager v0.6.1 could use trialKeeper v0.6 or trialKeeper v0.6.2, but could not use trialKeeper v0.5.1 or trialKeeper v0.7.

If you could not run your experiment and want to know if it is caused by version check, you could check your webUI, and there will be an error message about version check.

../../_images/experiment_error.gif

With local training service, the whole experiment (e.g., tuning algorithms, trials) runs on a single machine, i.e., user’s dev machine. The generated trials run on this machine following trialConcurrency set in the configuration yaml file. If GPUs are used by trial, local training service will allocate required number of GPUs for each trial, like a resource scheduler.